About the client
After assessing the clients requirements, we recommended the installation of a replacement high efficiency wall hung system boiler including a new fully room sealed balanced flue system, automatic ignition, integral circulation pump, suitable time and temperature controls and all necessary pipework modifications including conversion of the existing open vent system to that of the sealed type. Our proposal also allocated time to fully service and clean the existing fan convector units to ensure maximum efficiency of the system. We also recommended that the church hall staff made adjustments to their current radiator housings as the enclosing panels were creating a huge reduction in heat input to the room. To continue preventing people touching the hot radiators we suggested cutting vents into the sills to allow more air movement whilst still keeping them safely covered.
Upon instruction from the Holy Cross Ryton Parochial Church Council, we began by stripping out the old boiler, flue and circulation pumps. We then extended the cold water mains pipework down to the boiler room to allow conversion to a sealed system. The next step was to mount the new boiler on the wall and install the new horizontal room sealed flue and carry out the necessary pipework modifications including installing the new expansion vessel and magnetic filter.
Now that the installation has been successfully completed the church hall are benefiting from greatly improved efficiency of the heating system and lower heating bills as a result.